Stronghold

strong

StrongHold Manufacturing has an excellent line of cattle chutes. They are rugged and well made. Contact us for pricing and information. Click on a section below for product information and be sure to watch the video below.

Squeeze Chutes with Manual Headgate

Squeeze Chutes with Manual Headgate

1100H-STRONGHOLD

1100H Cattlemaster Chute


No adjustments needed from the smallest calves to the largest bulls.
Both sides open fully.
Swing out branding doors.
Fold down foot doors.
Palpation doors track with sides.
Removable side restraining rails.
Removable breast bar.
Swing arm controls either side.
30” Wide, 11” Narrow
All wear points & pins are replaceable.
Headgate and end gate shields extend out past door opening width, no risk of injury to operator or bystanders.
Headgate has 3/4” rubber on animal side as well as rubber and nylon for neck sides.
Vertical, parallel movement. No forward or rearward movement of sides.
Transport to work in minutes.
16” 10-ply tires.
Ball coupler.
Commercial duty winches.
Electric or gas power units

Without Palpation Cage
With round bar pass through floor
With scales

1100M-STRONGHOLD

1100M Cattlemaster Chute


Heavy duty manual headgate
Flex cutting gate or dropgate
Palpation cage with latches following squeeze
Side exit, right side
Side entrance, left side
Six removable branding doors
Double side squeeze
73″ inside working height
124″ inside working length
Breast bar
30″ Inside working width
(2) Two restraining rails
Fiberglass butt bar

Wheel assembly
Digital scale
Side blinders on branding doors
Bi-Fold Rear Gate
Length: 140″
Width: 47″
Height: 92″

2100-STRONGHOLD

2100 Squeeze Chute


Completely portable
Eight foot working alley
Cable controls
Heavy duty manual headgate
(2) Two Bifold cutting gates
Palpation cage with latches following squeeze
Side exit, right side
Side entrance, left side
Six removable branding doors
Double side squeeze
73″ inside working height
124″ inside working length
Breast bar
30″ Inside working width
(2) Two restraining rails
Fiberglass butt bar

Wheel assembly
Digital scale in alley way
Side blinders on branding doors

2100X-STRONGHOLD

2100X Squeeze Chute


Completely portable
Eight foot working alley
Cable controls
Heavy duty manual headgate
(2) Two Bifold cutting gates
Palpation cage with latches following squeeze
Side exit, right side
Side entrance, left side
Six removable branding doors
Double side squeeze
73″ inside working height
124″ inside working length
Breast bar
30″ Inside working width
(2) Two restraining rails
Fiberglass butt bar

Wheel assembly
Digital scale in alley way
Side blinders on branding doors

roundbale1

900 Squeeze Chute


Heavy-duty manual headgate
Flex cutting gate or drop gate
Humping bar
Palpation cage
Side exit
Six branding windows
Removable bottom side panels
Adjustable squeeze
10-gauge diamond plate floor
Wheel assembly for portability
Digital scale
Cable controls
Reversible unit
Extension handle
Bi-Fold Rear Gate
Length: 10′

Width: 32″
Height: 6′ 1″
Weight: 1,270 lbs.

roundbale1

2000 Squeeze Chute


Heavy-duty manual headgate
Two flex cutting gates
Humping bar
Palpation cage
Side exit
Six branding windows
Removable bottom side panels
Completely portable
Eight-foot adjustable working alleyway
Cable controls

Digital scale in alleyway
Corral panel carrier (capacity of 10 panels)
Length: 19′ 5″
Width: 32″
Height: 6′ 5″
Weight: 2,500 lbs.

roundbale1

Calving Pen


Self catch Headgate
10′ x 10′ or 10′ x 12′
Hinged Nursing Panel
Pin together construction
Parts can be used separately the rest of the year

Crowding Tub and Alleys

Crowding Tub and Alleys

roundbale1

Cattle Crowding Tub


Heavy-duty 1-1/2 inch square tubing
Reversible entrance or stationary tub
Eight-foot sweeping radius
Spring-loaded crowding gate latch
14 gate locking points
Heavy-duty towing hitch
Folds in half to six feet wide
Wheel assembly for portability

Length: 16′
Width: 6″ (when transporting)
Height: 6′
Weight: 935 lbs.

roundbale1

Alley Frames


Interchangable brackets on frames allow one frame to be used in various positions
Two-inch 14-gauge square tubing throughout
Infinite and secure adjustment
No moving parts within six inches of the ground
Pre-punched for Alley Can’t Back
Alley adjusts from less than 15 inches to 28+ inches

roundbale1

Spool Adjustable Alley Panels


Adjustable squeeze alleyways provide a width range of 16 inches to 28 inches, allowing you to work with any size of calf. Easy Adjustment Pre-punched for Alley Can’t Back.


curve

Curve Adjustable Alley


8’ Long Sections Available In:

Adjustable (20” to 30”), Single Alley, Short or Tall Sheeted, Straight
Adjustable (20” to 30”), Single Alley, Short or Tall Sheeted, S-Curved
Adjustable (20” to 30”), Double Alley, Short or Tall Sheeted, Straight
Adjustable (20” to 30”), Double Alley, Short or Tall Sheeted, S-Curved

Sorting and Holding Chutes with Manual Headgate

Sorting and Holding Chutes with Manual Headgate

roundbale1

Cattlemaster 640 – Sorting & Holding Chute


Heavy-duty manual headgate
Flex cutting gate or drop gate
Humping bar
Palpation cage
Side exits on both sides
Restraining pipe
Ratchet bar side squeeze
Wheel assembly for portability
Digital scale
Extension handle
Bi-Fold Rear Gate

Length: 8′ 10″
Width: 32″
Height: 6′ 2″
Weight: 935 lbs.

roundbale1

Cattlemaster 440


Heavy-duty manual head gate
Heavy-duty bolted construction
Swing door on both sides
Ratchet bar side squeeze Sheet steel 32 inches high on side panels
Treated wooden floor
Restraining pipe
Humping bar

Length: 84″
Width: 32″
Height: 72″
Weight: 550 lbs.
More Cattle Equipment Options

More Cattle Equipment Options

roundbale1

Self Catch Headgate (auto headgate)


Adjusts to catch different sizes of beef and dairy animals.

roundbale1

Y-Sort


Standard Features
Attaches anywhere in alleyway
Sorts animals in two different directions

roundbale1

Slider Gate


Spring loaded locking action
Allows the gate to be locked in an open or closed position
Heavy duty construction and bracing

roundbale1

Lift Gate


Lift Gate now comes with lock down feature.
Strong and trouble-free
Easily attaches to chutes and squeeze alleys

roundbale1

Neck & Nose Bars


Another StrongHold option for head stability.
Attaches easily to the front of the headgate and swings out to allow for quick release.
Weight: 30 lbs.

roundbale1

Headtable


When you need complete head immobility, the StrongHold Headtable is the ideal option for treating pinkeye, tagging ears, ringing noses, dehorning or any other minor head operation. Head chain and nose bar are standard equipment.
Weight: 40 lbs.

roundbale1

Palpation Cage


The palpation cage attaches easily to your chute with four pins. Can be entered from either side. Door opens with a bump of your hip.
Weight: 175 lbs.

roundbale1

Alleyway Can’t Back


Standard Features
Bolts to side of alleyway
Prevents animals from moving backward
Reversible for either side of alleyway
Weight: 25 lbs.

Heavy Duty Manual Head Gate

roundbale1

Heavy Duty Manual Head Gate


Quick-release friction
No-choke stanchion design
Handles all size animals
Side bars stay clean in freezing weather
Short seven-inch step-over for exit
Full width exit
Reversible handle operation

Width: 35 1/2″
Height: 61 1/2″
Inside Height: 63″
Weight: 225 lbs.
Walk Thru Gates

roundbale1

Walk Thru Gates


Length: 8′ Height: 82
Length: 4′ Height: 82″
Heavy-duty 2″ square tube main frame
Quick and easy access via double draw pin latch
Freely swinging removable gate
The fullest complement of interlocking connectors
Gallagher - 210 Scale Package

ag210_package_large

Gallagher – 210 Scale Package


Today, leading producers recognize that regular livestock weighing is vital to increased productivity and profitability. Quality engineered and designed for the tough farm environment (and simple to use!), the Gallagher G210 Weigh Scale package provides a complete weighing solution at an affordable price.

 

Order Online

Buy Miraco Parts Online

miraco

We have what you need for Miraco waterer parts. We carry a complete line of the Miraco automatic waterer parts.
SHOP NOW

Contact Us

Weldy Enterprises
911 East Waterford Street
Wakarusa, IN 46573

Ph: (574) 862-4491
Toll Free: (800) 628-4728
Fax: (574) 862-2122
info@weldyenterprises.com